torque sensor
torque transducer
torque meter

Torque sensors and power controls were developed in the late 1990s.

But he still thinks he can hear the torque sensors go out of alignment.

And the market of the future for a robotic arm system with torque sensors and force control?

The automaker told the safety agency at the time that a problem with the torque sensor might cause a “higher than normal” steering effort.

The lateral arrays and the torque sensors appear to be operating within accepted parameters.

Certain models use a torque sensor incorporated as part of the RacePak data system.

The Turbo also has a torque sensor that boosts speeds the faster you pedal.

Driver steering effort is measured by a torque sensor mounted on the steering column.

The forces were recorded by a force torque sensor that was also part of the DEE equipment.

Once the arm pulls a punch, its motors and torque sensors allow it to "freeze", supporting its own weight.

Revolutionary non-contact torque sensor from Fast Technology.

The conventional adaptive controller is modified to use torque sensor measurements and has been tested on four types of harmonic drives.

Limit and torque sensors (2)

Dynamometer Torque Sensor features 4 temperature inputs.

Quality-control inspectors can use them to calibrate torque sensors and verify torque on fasteners.

Such magnetoelastic torque sensors are generally used for in-vehicle applications on racecars, automobiles, aircraft, and hovercraft.

Our manufacturing program includes torque sensors, force sensors, load cells as well as the corresponding measured data evaluation units.

A power meter measures power output in watts, using a torque sensor in the bottom bracket or rear hub.

Joint angles are measured using custom-designed Hall-effect sensors and the robot can be equipped with torque sensors.

A torque sensor based on conventional strain gauges requires two separate unidirectional strain sensors mounted at right angles.

As you push off, the bike seems a bit heavy and sluggish, but once the pedal pressure or torque sensors detect your efforts, the motor joins in.

It can be used for exercising one or both arms or legs at any inclination and includes force and torque sensors at the hand-grips.

A quality torque analyzer should have enough memory to record several hundred readings, and it should store calibration data for multiple torque sensors.

In-Line Rotary Torque Sensors offer 16-bit resolution.

In-Line Rotary Torque Sensor suits test applications.

Torque transducers of one or two strain gauges are also available.

There are several styles available for torque transducers.

A typical test setup includes a load machine, clutch and torque transducer.

A torque transducer provides an electrical signal that is proportional to the torque.

A torque transducer usually consists of four strain gauges in a Wheatstone bridge configuration.

The advanced technology of the TSC torque transducer reduces maintenance requirements.

The cogging torque is measured with a torque transducer connected between the test object and the load machine.

A torque transducer, similar to a load cell, is an electronic device used to convert torque into an electrical signal.

Newer types of torque transducers add conditioning electronics and an A/D converter to the rotating shaft.

The display unit, incorporating an analogue gauge similar to a Voltmeter, was attached by a cable to a separate, strain gauged torque transducer.

Commonly, torque sensors or torque transducers use strain gauges applied to a rotating shaft or axle.

Another means to measure torque is to connect the engine to the dynamometer through a torque sensing coupling or torque transducer.

Low inertia parts and non-contact measurements enables the TSC torque transducer to operate to high speeds and sensitivity.

Devices include slip-ring and 'telemetry' torque transducers, non-rotating torque cells, clamp-on torque-measuring systems, special load cells and test rigs for both development and production applications.

Torque measurement is somewhat complicated since there are two machines in tandem - an inline torque transducer is the preferred method of torque measurement in this case.

GTM Testing and Metrology GmbH : A manufacturer of load cells, torque transducers and multi-component transducers.

Rotary torque sensor Sensotec's 1650B rotary torque sensor will convert the shaft of any drive train into a rotary torque transducer in a matter of minutes.

The TTT works with Norbar's "smart" torque transducers or most standard mV/V calibrated transducers giving the TTT a vast range of potential applications.

Inscale supplies a complete range of Platform Scales and balances, we also provide various sensors for force measurement applications, such as load cells and torque transducers all can be provided with their own instrumentation.

This system, based on a side discharge impeller-type tanker spreader, features an electro-hydraulic operated discharge control door and a novel driveline torque transducer capable of sensing FYM discharge rate in real-time.

At all frequencies, torque amplitudes of less than 0.1microNm can be detected in direct strain oscillation mode - significantly better than even the most advanced conventional strain controlled systems utilising separate actuators and torque transducers.

A torque sensor or torque transducer or torquemeter is a device for measuring and recording the torque on a rotating system, such as an engine, crankshaft, gearbox, transmission, rotor, a bicycle crank or cap torque tester.

The project was conceived following a prior SERC/DTI Link project, High Speed Torque Transducer, SERC Research Grant no GR/G61755, which demonstrated the overall feasibility of utilising a pair of SAW resonators for torque monitoring.

We are also one of the few companies which offer special torque meters and loadcells.

It can be measured with a torque meter.

Torque meter is required for all training in turboprop aeroplane simulators.

Torque meter is alternative name of this dynamometer.

The output torque is easily measured using a static torque meter.

The clock was replaced with a torque meter that indicated how much torque was being delivered to the front wheels (0%-50%).

The aircraft was radioed to return to the squadron and was shut down for an inspection of the torque meter bowl filter assembly.

A motor evaluation option can be used in conjunction with a torque meter to measure motor efficiency using dynamometer test rigs.

A nifty little Easter egg, it has a torque meter, a turbo boost gauge and a G-force meter.

The 'Static Torque Meter' was much more compact than the earlier versions and were easier to use because this system avoided the needle fluctuations of the spring balance type.

Air Asia maintains professional support for calibration requirement of micrometer, caliper, pressure gauge, torque meter, temperature indicator, ammeter, voltmeter, Vom multi-meter, and power meter.

Legislation Customs Tariff 82.04 Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); interchangeable spanner sockets, with or without handles.

Anchor Hocking torque meter or a torque meter capable of measuring up to 1 newton meter, with a precision of 0.1 newton meters.

For the purposes of these appeals, the relevant tariff nomenclature reads as follows: 82.04Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); interchangeable spanner sockets, with or without handles.