The manufacturer claims this can increase tool bit life by ten times or more.

Tool bits have been used for centuries, yet their further technological development continues even today.

A bit is a part of a horse bridle, and there are also tool bits.

No one here ever dismantled their machines overnight to protect tool bits.

A fly cutter is composed of a body into which one or two tool bits are inserted.

Before about 1900, almost all tool bits were made by their users, and many machine shops had forges.

Most fly cutters simply have a cylindrical center body that holds one tool bit.

It is commercially used in tool bits cutting tools.

For example, a tool bit for cutting metal may have nearly a 90 edge; it would probably not even be considered a blade.

Spring loading - deflection of the tool bit away from the material when excessive load is applied.

Variable overhang - the tool bit may be extended or retracted as the job requires.

As the entire unit rotates, the tool bits take broad, shallow facing cuts.

"How many tool bits would you like?"

Machine tool operators must be able to install or remove tool bits quickly and easily.

Its uses include shaping tool bits or various tools that need to be made or repaired.

The latter name reflects that they often take the form of a bar of steel with a tool bit fastened on each end.

Some companies now offer a modernized version that uses standard 1/4-inch hex shank power tool bits.

The ground tool bit is held rigidly by a tool holder while it is cutting.

When the tool bit has been ground to the correct angle, they may then be used to set the tool perpendicular to the workpiece.

Materials with cubic boron nitride crystals are often used in the tool bits of cutting tools.

Fly cutters are a type of milling cutter in which one or two tool bits are mounted.

The dimensions between the piece and the tool bit can be changed about two axes to cut both vertically and horizontally into the internal surface.

Most tool bits today are made of HSS, cobalt steel, or carbide.

Further, the speed of these steps can be adjusted to allow tool bits to be eased into the board material rather than hammered into it.

To overcome the problem, we removed our tool bits and locked them up, and then spent valuable company time the next morning resetting our equipment.

They make a bowl turning tool rest, and two straight tools rests.

The turning tool material must be harder than the material being turned in order for the process to work.

Stellite has also been used in the manufacture of turning tools for lathes.

The bolt is then retracted from the inside of the cylinder hole using a turning tool, such as a screwdriver.

Because of these methods of production he is also able to make special tools to order, one such recent order was for hooked turning tools.

The new $134,400 studio contains six partitioned student stations with state-of-the-art lathes, turning tools, task light and rolling tool chest for each station.

"Turning Tools and Operations."

The tools for both turning the cylinder and the sphere are similar to metal turning tools, with cutting tips brazed onto square bars.

The CNC machines use x, y, and z coordinates in order to control the turning tools and produce the product.

Often these bits will be mounted at right angles to the bar's main axis, and the cutting geometry is supplied by using a standard right-hand turning tool.

Wood is generally removed by running a turning tool down the slope of the wood from a larger diameter in the wood to a smaller diameter.

Turning tools are generally made from three different types of steel, Carbon steel, High speed steel (HSS), and more recently powdered metal.

After propelling an arrow, they could not just pull the bowstring back again by hand, but had to draw it taut along the stock by means of a small turning tool.

It also offers a workbench made of African muninga wood, as well as hickory-handled hammers and numerous rasps, files, carving tools, clamps, routers and turning tools.

Just as they clean up all the trash and litter, they also clean up the earth and the sky, transmogrifying cars, turning tools, parts, weapons, bolts into carbon and iron.

It allows for adjustment of the toolrest in various positions, by the lathe operator, making it possible to hold the turning tool in the most convenient position for removing material from the spinning wood.

The engineers among you who cut your teeth - using a diamond-tipped turning tool if working on something hard - in the firm's model shop, will rage and roar and split asunder with bellows at Jonathan's mistake.

Opposing tool bits may be used (instead of a rest) to cancel each other's deflecting forces (called a "balanced turning tool"), in which case the box tool begins to overlap in form, function, and identity with a hollow mill.

The earliest screws tended to be made of wood, and they were whittled by hand, with or without the help of turning on a lathe with hand-controlled turning tools (chisels, knives, gouges), as accurately as the whittler could manage.

Here are some basic instructions on how to remove objects stuck in the disposal, use a special turning tool or jam wrench, fix a clogged drain, reset an overloaded disposal, and how to maintain a garbage disposal to prevent further problems.

This came at the same time as a renewed interest in smaller domestic furniture in the homes of the rich, and the general introduction in their homes of all kinds of new mechanical devices such as small clocks and wood turning tools.

WC is used to make wear-resistant abrasives and cutters and knives for drills, circular saws, milling and turning tools used by the metalworking, woodworking, mining, petroleum and construction industries and accounts for about 60% of current tungsten consumption.