rivet head

The rivet head popped a quarter inch from the other side.

Position the chisel at a 45-degree angle against the rivet head.

Around the body of the animal there are three rosette shaped rivet heads.

I don't know why he didn't fall off, unless he was sitting on a larger rivet head than I had been.

The brass rivet head flew across the room.

With it was a loose rivet head.

The ball-shaped peen was designed to fashion rivet heads.

Use a small grindstone chucked into an electric drill to grind off the rivet head.

The rivet heads pulled through the skin and there was severe distortion of the right-hand tailplane.

The ice chest caused me to lose my grip on the rivet head, and I could feel myself slowly vibrating off the tailgate.

Now Shasa could make out the rows of rivet heads along the silver fuselage and on the wide blue wings.

Then he regaled them with tips on grinding rivet head for the least amount of drag on the wings.

Rusty really was rusty, an ancient iron robot studded with rivet heads.

Rivet heads for fitting attachments are on the front, but are similar to the decorative raised bosses and difficult to identify.

They saw rivet heads.

A Rivethead or Rivet Head is a person associated with the Industrial dance music scene.

I tried not to think about slippery shoes and condensation moisture and protruding rivet heads and all that open air under me.

He was on his feet and pocketing the sheared rivet heads when he heard the tumblers of the door lock clicking.

These pipes of lap welded joints delivered more water, there being less friction of rivet heads upon the water.

The show's themes were all there: the articulated shoulder and breast plates, the bold rivet heads, the mesh faceplates and helmets.

The DCA reported rivet heads popping off the inside hull of the large holds containing resupply materiel.

At the table with Hamper is Dave Steel, another former shop rat, a handsome and bitter man who is a major character in "Rivet head."

After a rivet head fell in June, netting was strung from the ceiling of the main dome; a subsequent study found the turn-of-the-century building had structural weaknesses.

Also, I was sitting on a little domed rivet head, and I got as good a grip on that as I could manage.

Other makings on the rivet head, such as small raised or depressed dimples or small raised bars indicate the rivet's alloy.