hydrostatic test

"Based on the hydrostatic test, air made it to the alveoli."

A hydrostatic test head is usually specified as a height above the tank top.

To maintain the quality and safety of this product, hydrostatic testing is utilized.

This usually consists of an internal visual inspection and a hydrostatic test.

Hydrostatic tests, on the other hand, performance verify fluid pressure vessels.

Newly manufactured pieces are initially qualified using the hydrostatic test.

These may include hydrostatic testing and line packing.

Periodic hydrostatic testing is recommended, especially if the fluids being handled are corrosive.

The Smithsonian's staff, after a few further hydrostatic tests, were confident that the locomotive could again operate under its own power.

Hydrostatic testing is the most common method employed for testing pipes and pressure vessels.

Hydrostatic tests are conducted under the constraints of either the industry's or the customer's specifications, or may be required by law.

A very commonly used test after new construction or repair is a hydrostatic test, sometimes called a pressure test.

In a hydrostatic test, a system is pressurized with water to look for a drop in pressure or to see where it leaks out.

In South Africa a hydrostatic test is required every 4 years, and visual inspection every year.

It's more conclusive than the hydrostatic test itself, because lungs may float if artificial respiration was attempted."

They are then re-qualified at regular intervals using the proof pressure test which is also called the modified hydrostatic test.

(Unless stamped with a star (*) in which case the cylinder meets certain specifications and can have a 10 year hydrostatic test life).

These included fuel testing, a gun revetment, hydrostatic testing, static testing, and many others.

For example, hydrostatic testing beyond yield will tend to 'even-out' the stresses and thereby reduce the peak residual stress.

To help evaluate the effectiveness of current tests, seven tank cars known to have structural cracks were subjected to hydrostatic tests involving liquid pressures.

Pipeline leak detection includes hydrostatic test after pipeline erection and leak detection during service.

'Works' A 'hydrostatic test' is the common way in which leaks can be found in pressure vessels such as Pipeline transport and plumbing.

The important features of this law were the requirement for hydrostatic testing of boilers, and the requirement for a boiler steam safety valve.

Hydrostatic testing is also a way in which a gas pressure vessel such as a gas cylinder or a boiler is checked for leaks or flaws.

The last 160 miles of hydrostatic testing were done, 33 remedial welds were completed, and 45 miles of pipe were insulated, among other tasks.