dynamic load

This has other effects too, such as dynamic load transfer.

In the case of dynamic loads, the material fatigue must also be taken into account.

They are then put through the same dynamic loads.

Dynamic load balancing is also needed to maintain performance scaling.

A dynamic load is one which changes with time fairly quickly in comparison to the structure's natural frequency.

Dynamic load control is a form of back busying to the telephone switch.

Dynamic load at normal running conditions due to profile error on the tooth.

To calculate the dynamic load the classification societies use energy equations.

When dynamic loads occur, these are absorbed by compression of the cushion.

Improvement of the resistance to static and dynamic loads.

Due to dynamic loads, bolted joints have a tendency to loosen.

Dynamic loads include people, wind, waves, traffic, earthquakes, and blasts.

In all cases, surprisingly large amounts of tensile strength were needed to cope with dynamic loads.

Rigid belt actuators can move dynamic loads up to approximately 230 pounds over about 3 feet of travel.

Additional load conditions can also be applied, such as dynamic loads or harmonic excitation.

Accelerometers are used to measure the motion and vibration of a structure that is exposed to dynamic loads.

Dynamic loads originate from a variety of sources including:

The static or dynamic loads carried by plates are predominantly perpendicular to the plate faces.

The connected elements (typically straight) may be stressed from tension, compression, or sometimes both in response to dynamic loads.

It used dynamic load balancing to determine which computer in the cluster controlled which location area.

Each node has a dynamic load value associated, which is computed by the formula:

A cable-stayed system assumes all static and dynamic loads on which the very existence of the bridge depends.

Modern structures have computer controlled mechanical systems that monitor dynamic loads and automatically compensate the inflation for it.

Servers may also employ dynamic load balancing scheme to distribute requests across various pieces of hardware.

Even when a foot was present on the sensor a dynamic load circuit was able to detect and distinguish between the signals.